Check Distributor Stock
Text Search
Product Series Search
Follow Cherry on
Twitter and Facebook
Twitter Facebook
Magnetic Proximity Sensors
Industrial-Grade Magnetic Sensors
Solid State, magnetic proximity sensors in adjustable threaded housing.

download PDF
  • Immune to Hostile Environments
  • High-Speed Capability
  • Reverse Battery Protection to -24Vdc
  • Sinking (open collector) output
  • South Pole Sensitive (except MP100105 and MP100106)
  • M12 Integral Connector Meets IEC 60947-5-2
  • Internal circuit protection allows sensor to meet all IEC requirements for Heavy Industrial
    Environments,ensuring immunity from:
    • Electrostatic Discharge
    • Electrical Transients
    • Radiated Electric Field
    • Conducted Energy
    • Magnetic Field Energy
  • Housing: stainless steel
  • Cable Insulation Material: Polyolefin
  • Cabled versions: -40C to +125C operate & storage temp
  • Connectorized versions: -40C to +105C operate & storage temp
Part # Operating Voltage Range (VDC) Supply Current mA  max Output
Saturation Voltage mV max
Output Current mA  max Operate Point, gauss (max) Release Point, gauss (min) Cable Connector
MP100101 5 to 24 12 700 25 300 60   12mm circular
MP100102 5 to 24 12 700 25 300 60 22AWG x 1m BBB  

*The GMR IC is approximately .100” inside the barrel. Gauss figures at the barrel end will be somewhat
higher. Consult Cherry Engineering for details.

Interface Recommendations

Notes: For sensors with integral connectors, mating cordsets are available from Cherry. Request Part
Number AS000203 for a straight female connector or AS000204 for a right-angle female connector.

Open Collector Sinking Block Diagram

   Specifications subject to change without notice.